How To Clean My Vornado Fan

How To Clean Your Vornado Air Circulator

How To Clean Your Vornado Air Circulator

3 Unproblematic Steps To A Clean Unit.

When it comes to household appliances, it tin oftentimes be difficult figuring out how to finer make clean them - especially when it involves taking them apart.

Here at Vornado, we've put together a guide (and an instructional video) on how to safely - and effortlessly - clean your Vornado Air Circulator unit.

What You'll Need

Cleaning your Vornado Air Circulator is incredibly easy, and yous just need a few household items to get it done:

• Phillips caput screwdriver
• Soft cloth
• Optional: Vacuum cleaner

Step 1

The get-go step to cleaning your Air Circulator is to remove the front grill.

At the peak of the unit (rear side), you'll find 2 screws. Using the phillips head screwdriver, carefully unscrew these and identify these screws somewhere safety and then as not to lose them.

In one case these are removed, tilt the Air Circulator back all the way (the forepart grill will now be facing upwards towards the ceiling) to detect a third screw at the base of the unit, slightly to the left of the tilt mechanism. Remove this third screw and place with the others for safekeeping.

Once all three screws have been removed, you can now hands lift the forepart grill from the unit of measurement. Identify this to the side for the time being.

Step 2

Now that the forepart grill has been removed, yous volition easily exist able to access the blades within the Air Circulator.

Using the soft cloth, carefully wipe down each blade to remove any dust that may have built upward afterward a catamenia of inactivity, as well as the inner parts of the unit. A dry cloth is all you need, but it tin can be dampened before apply if preferred.

Next, use the same textile to wipe down the inside and outside of the front end grill, assuasive you to remove any dust and unwanted fingerprints.

Tip!

You lot tin even utilize your household vacuum cleaner to remove any hard to reach grit, especially for the internal parts of the unit behind the blades. A vacuum cleaner hose or narrow zipper will let yous to easily reach and clean these areas, and can also be used on the blades and forepart grill for ease of use.

Step 3

Now that the unit has been cleaned, it's time to reattach the front grill.

To practise this, line upward the brackets and holes for each screw on both the inside of the unit, and the inside of the front grill. Lower the grill into place until the clips attach. The "V" of the Vornado logo should be "pointing" towards the bottom of the unit of measurement, or the hinge mechanism.

Supervene upon the screw at the lesser of the unit, then tilt the unit of measurement back to its upright position. Replace the final two screws at the top rear, and then utilize the cloth to give the unit of measurement one final wipe down to remove any concluding fingerprint.

Conclusion

That'south it! Your Vornado Air Circulator now looks good as new, and you can continue to use your unit throughout your domicile without the worry of unwanted dust.

Savour yr round comfort with Vornado.

---

Source: https://vornado.com.au/blogs/news/how-to-clean-your-vornado-air-circulator

Share this post